The Hi5 converts SDI or HD-SDI to HDMI for driving HDMI monitors. Embedded SD/HD-SDI audio is supported in the HDMI output allowing a convenient single cable audio/video connection. The Hi5 provides 2-Channel RCA style audio outputs for separate audio monitoring if needed. The Hi5 also provides a looping SD/HD-SDI output useful for connecting additional equipment, or for “daisy chaining” multiple monitors to the same SD-HD-SDI source.
Features
- SD/HD-SDI to HDMI
- Full HDMI support including 10-bit video and 8 channels of embedded audio
- Additional 2-Channel RCA jack audio output
- Equalized looping SD/HD-SDI output
- HDMI cable included
Tech Specs
Input
- SMPTE-259/274/292/296 SD/HD-SDI, 1 x BNC
Input Formats
- 525i, 625i,
- 720p 50/59.94/60,
- 1080i 50/59.94/60,
- 1080p23.98, 1080p24, 1080p25, 1080p29.97, and 1080p30
Outputs
- HDMI with embedded audio, 24-bit (selectable by internal jumper: 2 or 8 channels)
- Audio, 2-channel RCA-style outputs at -10dBV (nominal), Channel 1 and 2
- 1 Looping SD/HD-SDI output of the SDI input (75 ohm, unterminated)
HDMI
- Standard Type A connector
- Video:
8-bit RGB 4:4:4 or 10-bit YCbCr 4:2:2 (selectable by internal jumper) - Audio:
24-bit, with 2 or 8 embedded channels (selectable by internal jumper)
HDCP
- The Hi5 does not encode the HDMI output with HDCP encryption. By definition, SD/HD-SDI inputs to the Hi5 are unencrypted. The HDMI specification requires HDMI monitors to support unencrypted inputs.
Power
- +5VDC Regulated, 3 Watts, Power Supply Required (included with purchase)
Size
- 4.6″ x 2.4″ x 1″ (117 x 61 x 25mm)